Polymer-cement coatings
BIOGO
Polymer Impermeable Mortar
One-component · dry-mix repair mortar
A multi-purpose impermeable mortar for negative-side leakage, dampness, mold and substrate repair.
Product overview
Product overview and technical properties.
Polymer Impermeable Mortar is a one-component dry-mix mortar formulated by blending special white cement, quartz sand, redispersible polymer powder and multifunctional additives. It is a specialist mortar integrating repair, leveling, waterproofing, moisture-proofing, impermeability and mold resistance.
Technical data
Product and application data
The supplied TDS does not contain a separate Technical Standard table; all stated performance and application data are retained below.
| Technical item | Value |
|---|---|
| Product form | One-component polymer-modified dry-mix mortar |
| Package | 25 kg |
| Bond strength at 3 days | >1.5 MPa |
| Negative-side water-pressure resistance | >1.0 MPa |
| Application | Trowel in 2-3 layers |
| Minimum thickness per layer | 1 mm |
| Mixing | Mix 2-3 min, stand 2 min, remix 2 min |
| Working time | Use within 45 min |
| Application temperature | 5-35°C |
Product features
Performance and advantages
Bond strength to concrete exceeds 1.5 MPa at 3 days, with high retention after water immersion
Excellent physical properties with high compressive and flexural strength
Negative-side water-pressure resistance exceeds 1.0 MPa
Safe and environmentally friendly with good mold resistance
Typical application areas
Where this product fits
Negative-side water-leakage treatment and repair
Negative-side moisture-condensation treatment
Negative-side mold treatment
Basements, storage rooms, elevator shafts and similar areas
Transport and Storage
Protect the material from rainy or snowy weather and winds above Force 5.
Keep the material within the stated 5–35°C construction range and above 5°C for 24 hours after application.
In hot weather, cure the completed mortar layer by sprinkling water.
Use prepared mortar within 45 minutes; do not add water again during use.
Suitability depends on substrate condition, exposure, climate, detailing, film build and the approved project system. Complete a representative adhesion and compatibility trial before full application.
Same product family
Related products
BIOGO-J20
Polymer-Modified Cement Coating
View details
HONGYUAN JS
Polymer-Modified Cement Waterproof Coating
View details
BIOGO-JC
High Water-Resistant Polymer Cement Coating
View detailsOEM · Distribution · Project supply